DT Series Tables

DT Series Tables
Dump Tables


Conair DT Series Dump Tables provide a long, stable holding surface for pipe, tubing, and profiles as they emerge from extrusion operations. Located directly after the cutter or saw, the DT provides a smooth, firm landing until cutting is complete, then automatically dumps the cut extrusion to an off-line location, then quickly returns to home position, ready to accept the next length. The dump sequence is fully automated and typically programmed to occur as soon as the extruded product is cut to length and needs to be moved to make way for the next piece.

The use of a Conair Dump Table eliminates typical hang-up points in large extruded product operations, preserving finished product integrity and uniformity.

  • Simple-to-use operation
  • Reduced maintenance
  • Available in a variety of size ranges
  1. Downloads
  2. Videos
  3. Contact Us

Contact Us Form

Click here

email

info@conairgroup.com

Phone

+1 724 584 5500

Parts & Service

+1 800 458 1960 - United States

+1 814 437 6861 - International

parts@conairgroup.com

service@conairgroup.com

Specifications (click here to hide)
Front View Side View
Models DT12-12 DT16-12 DT20-12 DTV-20-6
Dimensions   inches {mm}
A - Height 65 {1651}
B - Height to centerline 39 - 45 {991 - 1143}
C - Table width 12 {305} 6 {152}
D - Width 37.1 {942} 32.1 {815}
E - Length 156 {3962} 204 {5182} 252 {6401}
Feed direction Right-to-left (STD)
Approximate weight   lb {kg}
Installed 800 {363} 995 {451} 1400 {635}
Shipping 1100 {499} 1295 {587} 1780 {870}
Input Voltage     Full load amps
115V/1 phase/60 Hz 1 Amp
Compressed air requirement
Pressure psi {bars} 60 - 80 {4.14 - 5.52}
Consumption ft³/m {liter/sec} 3 - 5 {1.4 - 2.4}
NPT fitting size    inch 3/8